Cisco Small Business AP541N Administration Manual page 70

Wireless
Modifying Virtual Access Point Settings
NOTE
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Table 14 Dynamic WEP
Field Description
RADIUS Key Enter the RADIUS key in the text box.
The
RADIUS server. You can use up to 63 standard alphanumeric
and special characters. The key is case sensitive, and you
must configure the same key on the AP and on your RADIUS
server. The text you enter will be displayed as "*" characters
to prevent others from seeing the RADIUS key as you type.
RADIUS Key Enter the RADIUS key associated with the configured backup
1–3 RADIUS servers. The server at RADIUS IP Address-1 uses
RADIUS Key-1, RADIUS IP Address-2 uses RADIUS Key-2,
and so on.
Enable RADIUS Select this option to track and measure the resources a
Accounting particular user has consumed such as system time, amount
of data transmitted and received, and so on.
If you enable RADIUS accounting, it is enabled for the
primary RADIUS server and all backup servers.
Broadcast Key Enter a value to set the interval at which the broadcast
Refresh Rate (group) key is refreshed for clients associated to this VAP.
The valid range is 0–86400 seconds. A value of 0 indicates
that the broadcast key is not refreshed.
Session Key Enter a value to set the interval at which the AP will refresh
Refresh Rate session (unicast) keys for each client associated to the VAP.
The valid range is 0–86400 seconds. A value of 0 indicates
that the broadcast key is not refreshed.
After you configure the security settings, you must click Apply to apply the changes
and to save the settings.
RADIUS Key
is the shared secret key for the global
4
65