Configuring Snmp Users - Cisco Small Business AP541N Administration Manual

5
106

Configuring SNMP Users

From the SNMP Users page, you can define multiple users, associate the desired
security level to each user, and configure security keys.
For authentication, only MD5 type is supported, and for encryption only DES type
is supported. There are no default SNMPv3 users on the access point.
Figure 24 SNMPv3 Users
Table 28 describes the fields to configure SNMPv3 users.
Table 28 SNMP v3 Users
Field
Name
Group
Description
Enter the user name to identify the SNMPv3 user.
User names can contain up to 32 alphanumeric
characters. Double quote (") is not a valid character.
Map the user to a group. The default groups are
RWAuth, RWPriv, and RO. You can define additional
groups on the SNMP Groups page.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Configuring SNMP on the Access Point
SNMP