Cisco Small Business AP541N Administration Manual page 109

5
104
• RWPriv—A read/write group using authentication and data encryption.
Users in this group use an MD5 key/password for authentication and a DES
key/password for encryption. Both the MD5 and DES key/passwords must
be defined. By default, users of this group have read and write access to
default all MIB view, which can be modified by the user.
RWPriv, RWAuth, and RO groups are defined by default.
To define additional groups, navigate to the SNMP Groups page and configure the
settings that Table 27
Figure 23 SNMPv3 Groups
Table 27 SNMPv3 Groups
Field
Name
describes.
Description
Specify a name to use to identify the group. The
default group names are RWPriv, RWAuth, and RO.
Group names can contain up to 32 alphanumeric
characters. Double quote (") is not a valid character.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Configuring SNMP on the Access Point
SNMP