Enabling Or Disabling The Log Relay Host On The Events Page - Cisco Small Business AP541N Administration Manual

6
NOTE
124

Enabling or Disabling the Log Relay Host on the Events Page

To enable and configure Log Relaying on the Event Logs page, set the Log Relay
options as described in
Figure 30 Log Relay Host
Table 32 Log Relay Host
Field
Relay Log
Relay Host
Relay Port
To apply your changes, click Apply. Changing some settings might cause the
access point to stop and restart system processes. If this happens, wireless clients
will temporarily lose connectivity. We recommend that you change access point
settings when WLAN traffic is low.
Log Relay Host, page
Description
Choose to either enable or disable use of the Log Relay Host.
If you select the Relay Log radio button, the Log Relay Host is
enabled and the Relay Host and Relay Port fields are
editable.
Specify the IP Address or DNS name of the remote log
server.
Specify the Port number for the syslog process on the Relay
Host. The default port is 514.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Administration
124, and then click Apply.
Event Logs