Cisco Small Business AP541N Administration Manual page 49

3
44
Table 9 TIme Settings (NTP)
Field
System Time
Set System Time
NTP Server
Time Zone
System Date
System Time (24 HR)
Description
Shows the current system time.
To permit the AP to poll an NTP server, click Using
Network Time Protocol (NTP).
To set the system time manually, click Manually.
This field appears when you select Using Network
Time Protocol (NTP) in the Set System Time field.
If using NTP, specify the server by host name or IP
address.
Using the IP address is not recommended as the IP
address is more likely to change.
Select the international time zone in which the AP is
operating, for example USA (Eastern).
This field appears when you select Manually in the
Set System Time field. Use the System Date list to
select month, day, and year.
This field appears when you select Manually in the
Set System Time field. Use the System Time list to
select hours and minutes. All times are relative to the
local time zone.
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
Enabling the Network Time Protocol
Setup