A/V Setting; Image Setting - Planet ICA-3110 User Manual

Hd ultra-mini bullet ir ip camera
Hide thumbs Also See for ICA-3110:
Table of Contents

Advertisement

HD Ultra-mini Bullet IR IP Camera
ICA-3110
In PORT mode, the FTP server builds the connection to the user's data port actively. However,
from the user-side firewall's standpoint, the action of connecting from FTP server is often
considered to be dangerous and should be blocked. In PASV mode, the problem is solved:
The FTP server waits for the data transmission connection built by the user. Make sure that
the server supports the mode you select.
Samba Setting:
Select this option to send the media files via a network neighborhood when an event is
triggered. Click "Apply" to save the setting, then use "Test" button to test the server connection.
A message box will tell you "OK!" if it works, and a test document will be created in the
location.
If the test fails, check the sharing setting of your location folder. The folder properties must be
"shared" and the permissions must be "Full Control" as the picture.
Samba only supports one layer folder.

3.7 A/V Setting

3.7.1 Image Setting

For the security and privacy purposes, there are three areas that can be set up for privacy
mask. Click Area button first and drag an area on the above image, and remember to save
your setting. The masked area will not show on both the live viewing and recording.
44

Advertisement

Table of Contents
loading

Table of Contents