Wireless (Ica-108W Only) - Planet ICA-108 User Manual

3.5.2 Wireless (ICA-108W only)

You could assign the related parameters into wireless setting. Note that this function is only
available for the ICA-108W with WLAN capability.
MAC address:
Site survey:
Interface Select:
Type:
Security mode:
Displays the Ethernet MAC address of the WLAN card. Note that user
cannot change it.
Click the "Reload" button. It will refresh information window which list is
the result of a network scan. Access points with a disabled SSID
Broadcast will not appear unless the camera is associated with it.
"Wired (Ethernet) only" or "Auto – wired if cable connected otherwise
wireless": Choose wired or wireless mode. However, note that wired is
priority.
To select one of WLAN modes from Infrastructure or Ad-Hoc mode.
Shows which type of security the network uses. The device supports
three security methods: None, WEP, WPA_PSK/WPA2_PSK
WEP settings:
Authenticatio Select Open or Shared Key System Authentication,
n: depending on the method used by your access
point. Not all access points have this option, in
which case they probably use Open System, which
is sometimes known as SSID Authentication.
WEP Mode: The key types available depend on the access point
being used. The following options are available:
36