Table of Contents
Advertisement
OWNER GUIDE
FUEL BED REFITTING
1. Place the rear base coal in the firebox. It should rest on the ledges at the rear sides of
the burner unit. When located gently
move the rear base coal so that it is as far
forward as possible. The amount of
movement will be negligible (See figure
4).
2. Place the front base coal in the firebox
with its bottom front locating over the
front rim of the firebox. Pull the coal
forward so that it locates immediately
behind the front rim of the firebox. (See
figure 5).The front base coal will touch
Figure 4. Rear Base Coal Position
the rear base coal as it is located.
Figure 5. Front base coal position
Pa ge 1 0
Advertisement
Table of Contents
