Fuel Bed Refitting - Valor Bauhaus 32-032-60 Owner's Manual

OWNER GUIDE
F U E L B E D R E F I T T I N G
1. Position the front coal in front of the
burner as shown in figure 5. The front
coal should fit snugly between the
burner and the two raised tabs on the
front edge of the tray.
.
2 Position the fuel matrix on top of the
burner as shown in figure 6. The bottom
of the matrix rear wall should drop
behind the two square flanges at the top
Figure 5 Front coal
of the rear legs. Ensure that the
matrix sits flatly on the top of the
burner.
3. Position the dress coals.
There are 4 square coals, 2 "finger"
coals and 15 random shape coals.
Do not let the dress coals fall into
the holes and valleys in the fuel
matrix and front coal.
3.1. Begin the coal build by placing
a square coal in the centre of the
front coal, ensuring that it bridges
across to the matrix as shown in
figure 7.
Figure 6 Fuel Matrix
Figure 7 Dress coal installation - stage 1
Page 12