Fuel Bed Refitting - Valor equinox 754 Owner's Manual

OWNER GUIDE

FUEL BED REFITTING

1. The front base pebble has the
letters 'MF' on the underside.
Locate the front base pebble in front
of the burner (See figure 5)
2. The rear base pebble has the
letters 'MB' on the underside.
Locate the rear base pebble behind
the burner (See figure 6)
Figure 5. Front base pebble location
3. There are four ceramic
support rods. Locate the ceramic
support rods into the slots of the
ceramic base (See figure 7)
The position of the pebbles is
important. Do not alter the
position of the pebbles from
Figure 6. Rear base pebble location
that shown in this
section of the owner's
guide.
4. The loose pebbles are
numbered and lettered on
the underside. They are
numbered '1' to '5' and
'A' to 'D'. There should
be four number '1'
pebbles, two number '2'
Figure 7. Ceramic support rod location
pebbles, one number '3'
pebble, one number '4' pebble, two number '5' pebbles, two pebbles lettered 'A', two
pebbles lettered 'B', two pebbles lettered 'D' and one pebble lettered 'C'.
Page 11