Factory Reset (Reset Handset To Default); Telephoning; Answering Calls - AEG D 5000 Instruction Manual

Parameter Reset
This feature requires the PIN code to turn back to default parameter settings
(delivery settings).
The phone book memory, the PIN and subscription information will not be cleared.
1. The handset is in standby (no tone).
2. Press the menu key B (4).
3. Press the arrow key l
4. Press the menu key B (4).
5. DATE/TIME is displayed.
6. Press the arrow key l
7. Press the menu key B (4).
8. SUB PIN is displayed.
9. Enter your PIN code by pressing the numerical keys.
10. Press the menu key B (4).
11. The handset emits a long tone. RESET is displayed.
All parameters apart from PIN have been reset to delivery setting

Factory Reset (reset handset to default)

This feature enables you to reset all settings without entering the PIN code.
After a full reset, all phone book memory numbers will be erased, the handset
will be removed from all base sets, the parameters will be reset to default and
the PIN code will be reset to default 0000.
Important: All user settings will be reset to default!
1. Disconnect the handset battery.
2. Press and hold the asterisk key
3. When you hear the tones, release the asterisk key
key B (4).
4. After the handset is locked to the base set press the asterisk key
(you will hear a confirmation tone and the display shows BU -- 1 HS -- 1).
5. Wait until the displays shows RESET?, then press the menu key B (4) to
confirm the full reset procedure.
6. The display will show RESETTING. (no connection)
Important: After a successful reset the handset again has to be subscribed to
the base set!

Telephoning

Answering Calls

(11) or k (3) until SETTING is displayed.
(11) or k (3) until RESET is displayed.
while reconnecting the battery.
and press the menu
again
25