Memory Full"-Mode; Programming The Pin Code - AEG D 5000 Instruction Manual

"Memory Full"-Mode

Is the full capacity of the memory is reached (at least 7 messages, each 2 min), the
answering machine returns into "Memory Full"-mode. The LED "Memory Full" (21)
flashes, as soon as the unit is switched into "message and recording"-mode. The unit
can't take any more messages.
If messages become deleted and the memory capacity reaches at least 15 seconds,
the unit returns into the "message and recording"-mode.

Programming the PIN Code

The security code is a 3 digit number that gives access to the programming
mode of your answering machine by remote control.
The default security code is 321.
Modifying the PIN Code
Press the key 31 located at the left underside of the base set until you are hearing a
beep and a message: BITTE EINSTELLEN; SICHERHEITSCODE (SET SECURITY
CODE) – first number of the security code (on delivery 3).
Press rewind i (27) or fast forward j (25), to do the setting. The respective
number will be announced.
Is the first number set, confirm by pressing the key 31. The second number will be
announced.
Press rewind i (27) or fast forward j (25), to do the setting. The respective
number will be announced.
Is the second number set, confirm by pressing the key 31. The third number will be
announced.
Press rewind i (27) or fast forward j (25), to do the setting. The respective
number will be announced.
Is the third number set, confirm by pressing the key 31.
The new programmed PIN will be repeated.
Note:
In case no key is pressed for 8 seconds, the phone repeats the old PIN Code and
returns to standby.
Checking the PIN Code
Press the key 31 located at the left underside of the base set until you are hearing a
beep and the phone repeats the PIN Code. On delivery: Three – Two – One
42