Remote Control; Remote Control Functions; Remote Control Codes Message Playback - AEG D 5000 Instruction Manual

Remote Control

You can operate your answering machine with a remote control, and switch On/Off
all functions. The answering machine can be secured by a PIN, to prevent a misuse
by third persons.
Note
You can remote control your answering machine with a DTMF phone, or by a selection
mode of tone operating phone.
1. Dial your telephone number.
2. The answering machine answers your call, you will hear the outgoing message
followed by a beep.
3. Slowly dial your security code (default 321 or your own).
4. You will hear two confirmation beep tones.
5. Slowly enter the control code corresponding with the wanted function.
6. After executing the command, you will hear a beep and the answering machine
will wait for another control code.
Note:
You have 10 seconds to enter your security code, otherwise the answering
machine will automatically break the communication.

Remote Control Functions

Remote Control Codes Message Playback

• Enter code 2.
During Message Playback
• Enter code 2 to pause during message playback.
• Enter code 2 to continue message playback.
• Enter code 3 to play back the next message.
• Enter code 11 to play back the previous message.
• Enter code 1 to play back the present message again.
• Enter code 6 to end playback.
Deleting the Current Message
1. During message playback, enter code 0.
2. The answering machine will delete the present message and continue message
playback.
45