Disk Management - Panasonic WJ-HD88 Operating Instructions Manual

3.4 Disk Management

It is possible to initialize the hard disk and recover the hard
disk index with "SYSTEM MANAGEMENT" – "DISK INFOR-
MATION".
3.4.1 HDD formatting
Stop all recording operations and disconnect all the net-
works.
(1) Press the [MENU] button. "WJ-HD88 SETUP MENU"
appears.
WJ-HD88 SETUP MENU
SYSTEM MANAGEMENT
SEARCH
REC&EVENT SETUP
PTZ SETUP
CAMERA SETUP
COMMUNICATION SETUP
REPORT
USER INFORMATION
DATA MANAGEMENT
(2) Move the cursor to "SYSTEM MANAGEMENT" and
press the [SET] button.
The "SYSTEM MANAGEMENT" menu is displayed.
(3) Move the cursor to "DISK INFORMATION" and press the
[SET] button.
SYSTEM MANAGEMENT
SYSTEM SETUP
DISK INFORMATION
REBOOT SYSTEM
PICTURE ADJUST
TIME & DATE
VERSION
The "DISK INFORMATION" menu appears.
DISK INFORMATION
No. Position Capacity
1 0-0 238.474GB
2 No disk detected
3 No disk detected
4 No disk detected
Prev
Notes:
• Capacity: Total capacity of the respective hard disk
(Unit: GB)
• Used: Disk space already in use (Unit: GB)
Used Hour Meter
127.067GB 6000h
Page 1/2
Next Return
• Hour Meter: Hours the hard disk has been used (Unit:
hour) 0h – 99 999h (Even the hard disk is used for more
than 99 999 hours, the indication will not change from
99 999h.)
Cautions:
1. Possible hard disk errors
Unformatted disk
Failure in hard disk identification
Disk access error
Fatal errors in hard disk
2. Hard Disk Setup Position
1
0
The outlined diagram shown above displays the WJ-HD88
seen from above. The numeral indicates the hard disk num-
ber.
In screen display, the hard disk position is indicated by two
digits. Example: A-B → 0-1
A: This is the hard disk position number in the diagram
above. 0, 1, 2, 3
B: Indicates the distinction between Master HDD (0)
and Slave HDD (1).
Regarding 0-1, for example, it denotes the Slave HDD
located in Position 0.
Note: If Master and Slave HDD are vertically connected in
the same position, both hard disks may become use-
less if either HDD unit is out of order.
(4) Move the cursor to the initializing hard disk and press
the [SET] button.
The confirmation dialog box will be displayed.
DISK FORMAT
All data will be deleted.
Do you continue ?
OK
Note: The hard disk cannot be initialized while record-
ing or playback is performed.
(5) When the cursor is moved to [OK] and the [SET] button
is pressed, initializing is started.
2 3
Cancel
47