Troubleshooting - Panasonic WJ-HD88 Operating Instructions Manual

Troubleshooting

Prior to repairing services, verification should be carried out for the respective items specified below.
Contact a dealer if a problem cannot be solved even after checking and trying the solution, or if a problem is not described
below, or when having an installation problem.
Problem
Power is not turned on.
No camera images are dis-
played.
Images do not fit on the screen.
Camera images look dark and
pale.
Parameter cannot be set up
with a [SETUP MENU].
Noise is generated during play-
back and images are some-
times distorted during playback.
Response is delayed when text
is displayed, buttons are
pressed, or the VMD function is
activated.
Preset Number 065 or greater
cannot be registered.
58
Check item/remedy
Confirm whether the power plug is inserted in an AC wall outlet.
Is the power cord connected to the power outlet of this unit?
Is the camera lens dislodged?
Is the power supply turned ON for the camera and connected
devices?
Is the cable connected correctly?
Are the screen setup parameters correct?
Confirm the user log-in security level.
This is not a fault. It is a resolution problem. Depending on the
monitor, images will not fit on the screen.
Aren't there dusts or dirt on the camera lens?
Confirm the user level for log-in.
These may be occurred due to the performance of this unit.
However, this is not an error.
While "NetBackup" (data backup function) is being performed
using the provided software, these responses may be delayed.
Open the setup menu of the corresponding camera, and regis-
ter the desired preset position number. Refer to 2.5.8 To dis-
play the camera setting menu of Operating Instructions. (On the
"WJ-HD88 SETUP MENU", Preset Number 001 to 064 can be
registered.)
Page
–
–
–
–
–
Refer to
page 33.
Refer to
page 22.
–
–
Refer to
page 22.
–
–
–