Panasonic WJ-HD88 Operating Instructions Manual page 46

(1) Press the [MENU] button. "WJ-HD88 SETUP MENU"
appears.
WJ-HD88 SETUP MENU
SYSTEM MANAGEMENT
SEARCH
REC&EVENT SETUP
PTZ SETUP
CAMERA SETUP
COMMUNICATION SETUP
REPORT
USER INFORMATION
DATA MANAGEMENT
Move the cursor to "DATA MANAGEMENT" and press
the [SET] button.
The "DATA MANAGEMENT" menu is displayed.
DATA MANAGEMENT
FACTORY DEFAULT
BACKUP
(2) Move the cursor to "BACKUP" and press the [SET] but-
ton.
The "SEARCH" menu appears.
Channel No.
Start
End
Event Only
OK
(3) Similarly as for "3.2 Playback Check" enter a checked
value.
(4) Move the cursor to [OK] and press the [SET] button.
The backup data list is displayed.
46
SEARCH
0
2004-10-10 11:30:30
2004-10-10 11:30:30
No
Cancel
BACKUP LIST
CH Quality Start
1 SF 2005-01-24 10:43:22
2 FQ 2005-01-24 10:43:22
3 GQ 2005-01-24 10:43:22
4 NQ 2005-01-24 10:43:22
5 EX 2005-01-24 10:43:22
6 SF 2005-01-24 10:43:22
7 FQ 2005-01-24 10:43:22
8 GQ 2005-01-24 10:43:22
Total: 14 Size: 12.08GB
Prev Next
Move the cursor to [Prev] or [Next] and press the [SET]
button in order to browse data.
Move the cursor to [Return] and press the [SET] button.
The screen returns to "SEARCH".
Caution: All record data from the starting time till the
ending time are displayed.
Up to 5 000 record data can be displayed.
When there are 5 000 records or more for the chan-
nel to be played, the latest 5 000 records will be
subject to be played.
Note: All record data are put into data backup at one time.
It is impossible to perform data backup only for a single
data file.
Move the cursor to "BACKUP" and press the [SET] but-
ton.
(5) The "BACKUP" dialog box is displayed and data back-
up is started.
BACKUP
Total :0002/0010
Current :256/2416 KB
|||||||||
When the [Cancel] button is pressed, data backup
operation is cancelled.
Caution: Any operation other than cancelling cannot be
performed during data backup.
(6) When data backup is completed, the ending dialog box
is displayed.
Notes:
1. The external HDD should be connected to the front
or back connector of this unit. If it is connected to
both front and back connectors at the same time,
normal data backup cannot be done.
2. Confirm that data backup is completed. Then, dis-
connect the external memory unit.
3. For backup image playback, it is necessary to use
the NetClient (USB Client) software on the accesso-
ry disc. For the usage method, refer to the Network
Operating Instructions.
End
2005-01-24 10:53:22
2005-01-24 10:53:22
2005-01-24 10:53:22
2005-01-24 10:53:22
2005-01-24 10:53:22
2005-01-24 10:53:22
2005-01-24 10:53:22
2005-01-24 10:53:22
Page 001/023
Backup Return
Cancel