Panasonic WJ-HD88 Operating Instructions Manual page 44

Online user information (ONLINE USER INFORMA-
TION)
(1) Move the cursor to "ONLINE USER INFORMATION" on
the "USER INFORMATION" menu, and press the [SET]
button.
ONLINE USER INFORMATION
No. User Level
1
2
3
4
5
Prev
(2) Move the cursor to [Prev] or [Next] in order to browse
the on-line user list.
For this unit, the remote on-line user can be turned off.
(3) Move the cursor to the user being turned off and press
the [SET] button.
The confirmation dialog box will be displayed.
Do you really want to
disconnect current user ?
(4) Move the cursor to [OK] and press the [SET] button.
The on-line user is disconnected.
Note: Even when a user of "MONITOR" is disconnected,
the user will be automatically connected again
when "Auto Reconnect" is selected for the user on
the Net Client software.
Password (PASSWORD)
(1) Move the cursor to "PASSWORD" on the "USER INFOR-
MATION" menu, and press the [SET] button.
Viewer ******
Operator ******
Manager ******
OK
(2) Enter a password with numeric keys. User level higher
than your own level cannot be modified.
Note: Refer to 1.2 for initial password setting.
44
Type IP Address
NO ONLINE USER
NO ONLINE USER
NO ONLINE USER
NO ONLINE USER
NO ONLINE USER
Page 1/4
Next Return
OK Cancel
PASSWORD
Confirm ****** ******
Confirm ****** ******
Confirm ****** ******
Cancel
Keylock (KEYLOCK)
(1) Move the cursor to "KEYLOCK" on the "USER INFOR-
MATION" menu, and press the [SET] button. The confir-
mation dialog box will be displayed.
KEYLOCK
Do you lock keyboard ?
OK
Notes:
1. The level for key lock operation stays at the same level
for the Viewer. If "Live Viewer" of the channel in the
"USER LEVEL SETUP" menu is set at "No", key lock will
be made and the screen will not be displayed.
2. In the case of key lock, only the camera selection but-
ton (numeric buttons) and the screen split button are
available. If other buttons need be pressed, it is neces-
sary to enter a password.
(2) Move the cursor to [OK] and press the [SET] button.
3.1.9 Data management (DATA MANAGE-
MENT)
Factory default (FACTORY DEFAULT)
Refer to 3. 5.
Backup selection (BACKUP)
Refer to 3. 3.
Cancel