Operation - Panasonic WJ-HD88 Operating Instructions Manual

2. Operation

2.1 Screen Operation
2.1.1 Spot display
If you want to display only one screen of a specified chan-
nel, press the channel number.
Images from the selected camera channel will be displayed
with a spot display.
Note: In the case of a 6-split screen, the screen of the
selected channel is displayed in the top left area (the
largest area of the 6-split areas). No display is present-
ed on the spot screen.
If you want to have a display on the spot screen,
changeover to the multi screen display and select the
4-split or 9-split mode. Then press the channel number.
2.1.2 Multiscreen display
4-split screen: Press the 4-split screen button.
Each time the 4-split button is pressed, the screens of
channels 1 - 4 or 5 - 8 are reciprocally displayed.
6-split screen: Press the 6-split screen button.
9-split screen: Press the 9-split screen button.
2.1.3 Sequence display
The sequential display
[SEQUENCE] button.
The icon is displayed in the lower part of the screen.
Press the [SEQUENCE] button again. The sequential dis-
play stops.
If a channel of "WJ-HD88 SETUP MENU" – "CAMERA
SETUP" – "CH Enable" is set at "Off", the channel is skipped
in the sequential display.
Note: Channel 1 cannot be set at "Off".
2.1.4 Mute
(1) Press the [ESC] button to activate the mute function.
The mute icon
screen.
(2) Press the [ESC] button again.
The mute function is cancelled.
Caution: If the mute function is in operation, all chan-
nels are muted. It is impossible to mute specific
channel(s) with this setting.
This is the same when the mute function is in opera-
tion during playback.
2.1.5 Still display
The presently displayed screen becomes still.
(1) Select the desired channel to be still by using the cam-
era selection button (1 - 8) or the direction button
(up/down).
The image frame of the selected channel blinks.
(2) Press the [STILL] button.
The selected channel screen becomes still and the still
icon is displayed in a lower part of the screen.
Caution: It is impossible to make the screen stand still
during playback.
26
will start by pressing
is displayed in the upper part of the
2.2 Manual Recording
(1) Select the desired channel to be recorded by using the
camera selection button (1 - 8) or the direction button
(up/down).
(2) Press the [REC] button.
The indicator of the corresponding camera button is lit
and recording is started.
The recording icon
channel.
(3) Select the desired channel to be stopped by using the
camera selection button (1 - 8) or the direction button
(up/down) to stop the recording.
Hold down the [STOP] button for 2 seconds.
The indicator of the corresponding camera button is
unlit and recording is stopped. At the same time, the
record icon also disappears.
Note: When the [REC] button is pressed while in the cam-
era control mode, recording will not be performed.
To perform recording, press the [REC] button after
releasing the camera control mode.
2.3 Playback of Recorded Image
2.3.1 Basic operation
the
(1) Select the desired channel to be played back by using
the camera selection button (1 - 8) or the direction but-
ton (up/down).
(2) Press the [PLAY] button.
Playback images are displayed on a single screen.
The playback icon
Notes:
1. The playback screen is displayed only for channel 1.
Live image monitoring for a channel other than channel
1 or screen splitting can even be carried out during
playback.
2. If the recording time is extremely short or the back-
ground is very dark, data may fail to be recorded or
played. In such a case, the recording file is lowered to
16 KB or below.
3. It is impossible to play the same recorded image simul-
taneously by two users or more.
4. When playing recorded images for many hours, images
may not be played smoothly or may be paused some-
times. In this case, stop playback once, and then
resume playback.
5. When displaying images on a 6-split screen, press the
[PLAY] button after selecting the desired channel to be
played. The playback images will always be displayed
at the upper left corner of the screen.
6. When there are 5 000 records or more for the channel
to be played, the latest 5 000 records will be subject to
be played.
To play recorded images other than the latest 5 000
records, search for the desired record and play it (3.2
Search and Playback).
Playback will stop when the date changes (0:00).
(3) Select the channel 1 by using the camera selection but-
ton 1 or the direction button (up/down) to stop the play-
back, and press the [STOP] button.
is displayed on the selected
is displayed during playback.