Panasonic WJ-HD88 Operating Instructions Manual page 30

2.5.3 Zoom
(1) Select the zoom/focus mode by pressing the [SET] but-
ton twice.
The zoom/focus icon
the selected channel.
(2) Press the direction button (up or down) to control the
camera's zoom.
(3) Press the [SET] button twice. The zoom/focus mode is
cancelled.
2.5.4 Focus
(1) Select the zoom/focus mode by pressing the [SET] but-
ton twice.
The zoom/focus icon
the selected channel.
(2) Adjust the focus by pressing direction buttons
(right/left).
(3) Press the [SET] button twice. The zoom/focus mode is
canceled.
2.5.5 Iris
(1) Select the iris control mode by pressing the [SET] but-
ton 3 times.
The iris control icon
the selected channel.
(2) Adjust the iris by pressing direction buttons (right/left).
(3) Cancel the iris control mode by pressing the [SET] but-
ton once.
2.5.6 To register preset position of cameras
(1) Press the [SET] button 1 - 3 times to select the required
camera control mode.
An icon is displayed on the screen of that channel,
according to the selected camera control mode.
(2) Press the [REC] button to display the Register Preset
Position window.
Preset Number
OK
Enter the desired preset position number, and then
press the [SET] button or click the [OK] button after
pressing the [SET] button.
Notes:
1. Refer to descriptions about "PRESET INFORMA-
TION" ("WJ-HD88 SETUP" – "PTZ SETUP" – "PRESET
INFORMATION") for the settings of preset positions
of cameras.
2. Up to 64 preset positions can be registered.
3. When setting preset positions for Panasonic cam-
eras, the indication "MEMORY" will be displayed at
the center of the screen by pressing the [SET] but-
ton. If the indication is not displayed, the camera is
not recognized.
30
is displayed on the screen of
is displayed on the screen of
is displayed on the screen of
PRESET REGIST
001
Cancel
2.5.7 To move a camera to the home position
(1) Press the [SET] button once to select the required cam-
era control mode.
An icon is displayed on the screen of that channel,
according to the selected camera control mode.
(2) The camera returns to the home position by pressing
the [STOP] button.
Notes:
1. For the settings of the camera home position, refer
to the operating instructions for the camera.
2. If the camera is not a Panasonic, the present posi-
tion is saved as an origin, in principle, if the [STILL]
button is pressed in the camera control mode. For
some cameras, however, this setup may fail. Refer
to the operating instructions for the camera for
details.
2.5.8 To display the camera setting menu
Prior to controlling the camera that has been connected to
this unit, perform the settings for this camera, without fail,
according to the "CAMERA SETUP" menu for this unit.
The contents, operating method, and other items of the
"CAMERA SETUP" menu can differ according to the camera
being used. Refer to the operating instructions for the cam-
era for details.
(1) Select the desired camera by using the camera selec-
tion button (1 - 8) or the direction button (up/down) dur-
ing the live monitoring screen.
The image frame of the selected channel (camera)
blinks.
(2) Select the pan/tilt control mode by pressing the [SET]
button once.
The camera pan/tilt control icon
screen of the selected channel.
(3) Press the [MENU] button.
The setup menu of the corresponding camera is dis-
played on the screen of the selected channel. In addi-
tion, the camera menu icon
of the pan/tilt control icon.
The camera setup buttons are specified as follows:
Cursor movement: up or down of the direction button
Preset value amendment: right or left of the direction
button
[SET] button to open the next menu after defining the
preset value. [SET] button
Return to the previous menu. [ESC] button
is displayed on the
is displayed on the right