Panasonic WJ-HD88 Operating Instructions Manual page 39

Digital disk recorder
Hide thumbs Also See for WJ-HD88:
Table of Contents

Advertisement

(2) Move the cursor to "AUDIO SELECT" and press the
[SET] button.
AUDIO SELECT
Audio1
Audio2
Audio5
Audio6
OK
(3) Use the direction button (up/down) and move the cur-
sor to the setting channel. The radio button is lit up and
recording takes place when the audio signals are sent.
Note: Even though recording is performed within the
same time period, much more hard disk capacity is
needed for recording with audio signals than
recording without audio signals.
3.1.4 PTZ setup (PTZ SETUP)
PTZ selection (PTZ SELECT)
For the selection of the camera, refer to "2.5 Camera
Control."
Preset position information (PRESET INFORMA-
TION)
(1) Press the [MENU] button. Move the cursor to "PTZ
SETUP" and press the [SET] button.
PTZ SETUP
PTZ SELECT
PRESET INFORMATION
(2) Move the cursor to "PRESET INFORMATION" on the
"PTZ SETUP" dialog box and press the [SET] button.
PRESET INFORMATION
Camera
1
Preset
Call
Return
Camera No.: 1-8
Default: 1 (Adjusted with the (right/left) direction
button)
Audio3
Audio4
Audio7
Audio8
Cancel
001
Preset: 001 - 256
Default: 001 (Move the cursor by using the direction
button (right or left), and enter the preset posi-
tion number by using the numeric buttons.
Call: Move the cursor to "Call" and press the [SET] but-
ton. The camera turns to the preset position of the
selected number.
Note: For PTZ preset position setting, refer to 2.5.6.
(3) When confirmation is completed, move the cursor to
[Return] and press the [SET] button.
3.1.5 Camera setup (CAMERA SETUP)
(1) Press the [MENU] button. "WJ-HD88 SETUP MENU"
appears.
WJ-HD88 SETUP MENU
SYSTEM MANAGEMENT
SEARCH
REC&EVENT SETUP
PTZ SETUP
CAMERA SETUP
COMMUNICATION SETUP
REPORT
USER INFORMATION
DATA MANAGEMENT
(2) Move the cursor to "CAMERA SETUP" and press the
[SET] button.
CAMERA SETUP
Channel No.
CH Enable
Mask Area
Mask Enable
PTZ Protocol
Rec. Reserve
Channel Name
All
OK
Camera No.: 1 - 8
Default: 1
CH Enable: "On/Off"
Default: "On"
Mask Area: Refer to note 4 below.
Mask Enable: "On/Off"
Default: "Off"
PTZ Protocol: "PANASONIC/TYPE1/TYPE2/TYPE3/
TYPE4"
Default: "PANASONIC"
Rec. Reserve: 000 - 200
Default: 000
1
On
Set
Off
PANASONIC
000
Days
CH1
Cancel
39

Advertisement

Table of Contents
loading

Table of Contents