I Disk Management - Panasonic WJ-HD500B Operating Instructions Manual

Digital disk recorder
Table of Contents

Advertisement

4. Select either YES or NO by pressing the + or - but-
ton.
Select YES, then press the SET button to execute the
selection (save or load).
The display shown below appears on the monitor
9-2 USER DEFINED SETUP
SAVE USER DEFINED SETUP
SAVING COMPLETE!
9-1 USER DEFINED SETUP
LOAD USER DEFINED SETUP
LOADING COMPLETE!
5. To return to the previous setup menu, press the
SETUP/ESC button.

I Disk Management

The Hard Disk status can be displayed on the monitor
screen.
1. Move the cursor to DISK MANAGEMENT in the SYSTEM
SETUP menu by pressing the C or D button, then
press the SET button.
The DISK MANAGEMENT menu shown below appears
on the monitor.
9-3 DISK MANAGEMENT
DISK INFORMATION
HDD FULL
ERASE
74
1%
2. Select an item or item parameter in the menu by press-
ing the D or C button.
3. To return to the previous setup menu, press the
SETUP/ESC button.
G Disk Information
1. Move the cursor to DISK INFORMATION in the DISK
MANAGEMENT menu by pressing the C or D button,
then press the SET button.
The DISK INFORMATION table appears on the monitor,
as shown below.
9-3-1 DISK INFO
HOURS
MAIN
1:30000 2:30000
EXT5
1:30000 2:30000 3:30000 4:30000
EXT4
1: *
2: *
EXT3
1:-
2:-
EXT2
1:-
2:-
EXT1
1:-
2:-
EXT0
1:-
2:-
EXT DVD:OK
FORMAT:HD500
LEFT10%
DATE
:SEP12.00 12:25
STATUS:OK
2. To return to the previous setup menu, press the
SETUP/ESC button.
G Disk Space Indicator
This item lets you determine the indication mode for the
FULL indicator when the remaining storage capacity is run-
ning low on the Hard Disk.
1. Move the cursor to the HDD FULL parameter in the
DISK MANAGEMENT menu by pressing the C or D
button.
2. Select the desired indicator mode by pressing the + or
- button.
OFF: No warning for remaining space
1 - 10%: The selected warning is issued if the remain-
ing storage capacity is between 1 and 10%.
The factory default setting is 1%.
Note: This setting is applied to the display on the moni-
tor screen and signal output from the CONTROL
port.
HDD TOTAL:
GB
¢¢¢
HOURS
HOURS
HOURS
3: *
4: *
3:-
4:-
3:-
4:-
3:-
4:-
3:-
4:-
GB
¢¢
SEP12.00 16:25

Advertisement

Table of Contents
loading

Table of Contents