Disc And Card Management - Panasonic DMR-BW880 Operating Instructions Manual

Disc and card management

[BD-RE] [BD-R] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
[+RW] [-RW‹VR›] [SD]
1
While stopped
Press [FUNCTION MENU].
2
Select "Others", then press [OK].
3
Select "Blu-ray Disc Management",
"DVD Management" or "Card
Management", then press [OK].
Blu-ray Disc Management
BD-RE
Disc Name
Disc Protection
Delete all titles
Format Disc
OK
RETURN
Providing a name for a disc
[BD-RE] [BD-R] [RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
[+RW]
After performing steps 1–3 (
Select "Disc Name", then press [OK].
( 74, Entering text)
≥The disc name is displayed in the Blu-ray Disc
Management/DVD Management window.
≥[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] With a finalised disc,
the name is displayed on the Top Menu.
≥[+RW] The disc name is displayed only if you play the
disc on other equipment after creating Top Menu.
DVD Management
Files 2
DVD-RAM Time Remaining 1:30 SP
My favourite
≥ Do not perform this operation when copying HD Video
(AVCHD format) to DVD-R or DVD-R DL. (
Setting the protection
[BD-RE] [BD-R] [RAM]
After performing steps 1–3 (
1 Select "Disc Protection", then press [OK].
2 Select "Yes", then press [OK].
e.g., when the disc is write-protected
Disc Name
Disc Protection
Delete all titles
72
VQT2J65
Files 3 Titles 11
Time Remaining 2:53 DR Used 2 : 18
Off
above)
My favourite
01 02
Chapter 1 Chapter 2
03 04
48)
above)
On
Delete all titles
[BD-RE] [BD-R] [RAM]
After performing steps 1–3 (
1 Select "Delete all titles", then press [OK].
2 Select "Yes", then press [OK].
3 Select "Start", then press [OK].
A message appears when finished.
4 Press [OK].
≥ Still picture data (JPEG) or computer data cannot be
deleted.
Format
[BD-RE] [RAM] [-RW‹V›] [+RW] [-RW‹VR›]
[BD-R] [+R] [+R]DL] (New disc only)
[SD]
Formatting deletes all contents (including
computer data), and they cannot be restored.
Check carefully before proceeding. The contents
are deleted when you format a disc or card even if
you have set protection.
After performing steps 1–3 (
1 Select "Format Disc" or "Format Card",
then press [OK].
2 Select "Yes", then press [OK].
3 Select "Start", then press [OK].
4 Press [OK].
To stop formatting [RAM]
01/02 Press [BACK/RETURN
≥You can cancel formatting if it takes more than
2 minutes. The disc must be reformatted if you do
this.
≥ Formatting normally takes a few minutes; however, it may
take up to a maximum of 70 minutes ([RAM]).
≥ Do not disconnect the AC mains lead while
formatting. This can render the disc or the card unusable.
≥ When a disc or card has been formatted using this unit, it
may not be possible to use it on any other equipment.
≥ [-RW‹V›] [-RW‹VR›] You can format DVD-RW only as DVD-
Video format on this unit.
left)
left)
].