Changing The Temperature Holding Time; Resetting To Factory Default Settings - Miele G 7881 Operating Instructions Manual

Changing the temperature holding time

Step
^ Press button 0 repeatedly or hold pressed in until
the level of the programme block you wish to change
appears in the display.
^ Turn the programme selector to the programme you
wish to change, e.g. E.
^ Press ß repeatedly or hold pressed in until the
required value appears in the display, e.g. 10.

Resetting to factory default settings

Step
^ Press 0 repeatedly or hold it pressed in until E33
appears in the display.
^ Turn the programme selector to a programme.
factory default setting:
electronics have been programmed to another setting:
^ Press ß when PP shows in the display.
The water softener has been reset to the factory default setting. It will need to
be reprogrammed, see "Programming the water softener".
Programme changes which have been made to the freely programmable
Programme A will be kept and will not be reset.
Programmable functions
Display / Result
E10 for Main wash 1
E26 for Final rinse 2
min _ 1
min _ 10
Display / Result
E33
00
PP
00, the factory default
settings have been
reinstated.
39