Settings - Calculated Industries ElectriCalc Pro 5060 User Manual

Settings

Permanent Values/Settings
Values and settings maintained in per-
manent memory can only be changed
(1) by pressing [Set] [x] (resets calcula-
tor to default settings), or (2) by chang-
ing each one or all of these settings.
The following are permanent values:
(1) Selectable (60°C/75°C/90°C) insula-
tion ratings and CU/AL wire type rat-
ings
(2) Phase setting (1Ø/3Ø)
(3) The entered values for volts, volt-
age drop %, power factor % and
efficiency %
Semi-Permanent Values
The following semi-permanent values
are cleared to default settings when the
calculator is shut off:
(1) Independent User Memory
(2) Free Air mode
User's Guide — 59