Calculated Industries ElectriCalc Pro 5060 User Manual page 10

[Set] [3] — Three-Phase (3Ø)
Sets calculator to three-phase mode.
Displays: 3Ø.
[Set] [2]
— Ambient Temperature (Amb°)
Permanently enters ambient tempera-
ture for determining ampacity derived
wire sizes. Ambient temperature will
only change when entering a new value
or by resetting the calculator ([Set] [x]).
Defaults to 30°C (86°F). Amb° will
display when the ambient temperature
is other than 30°C (86°F). Displays:
Amb°.
NOTE: The temperature units can be
displayed in Celsius (°C) or Fahrenheit
(°F) by using the preference function
([Set][÷]).
[Set] [4] — Copper/Aluminum
Used to toggle between copper (de-
fault) and aluminum wire types. When
the wire type is revised, any calculated
wire size will be re-calculated automati-
cally. If a wire size is entered with the
wrong wire type, pressing [Set] [4] will
change the material type without
changing the size.
Displays: Al or Cu.
8 — ElectriCalc Pro