Calculated Industries ElectriCalc Pro 5060 User Manual page 26

Third Press
Shows total cross-sectional area of all
entered wires of the selected wire insu-
lation. Displays: TTL WIRE AREA.
[CondSz] — Conduit Size
Used to find conduit sizes based on the
total area of the entered wire types and
sizes (up to 15 at one time). If the
quantity and insulation type has not
been entered, the calculator will as-
sume 2 THHN wires for single-phase or
3 THHN wires for three-phase calcula-
tions.
First Press
Enters or calculates conduit size.
Displays: COND SIZE.
NOTE: If a wire size has not been en-
tered or calculated, or an invalid con-
duit size is entered, the calculator will
display "nonE."
Second Press
Shows total number of wires in the
conduit for calculated conduit size.
Shows the conduit internal area for an
entered conduit. Displays: TTL WIRES
(calculated) or CONDAREA (entered).
NOTE: Third through fifth presses dis-
play only for calculated conduit sizes.
24 — ElectriCalc Pro