Calculated Industries ElectriCalc Pro 5060 User Manual page 22

First Press
Displays the current motor type. Note
there is no motor type in single-phase
mode.
Second Press
In three-phase mode only, subsequent
presses of [O-Load] will select and
display the next motor type from this
list: SQ-C non-E (Squirrel Cage, non-
Design E), SQ-C E (Squirrel Cage,
Design E), SYNC no codE (Synchro-
nous), WND no codE (Wound Rotor).
[DEFuse] — Dual Element Fuse
First Press
Calculates the minimum amp rating for
a Dual Element Fuse.
Displays: AMPS dE.
Second Press
Displays the full-load current percent
multiplier used to determine fuse size.
Displays: %FLC.
[Set] [DEFuse]
— Single Element Fuse (SEFuse)
First Press
Displays the minimum amp rating
based on phase, motor type, and am-
perage. Displays: AMPS SE.
20 — ElectriCalc Pro