Calculated Industries ElectriCalc Pro 5060 User Manual page 14

[Set] [8] — Induction/
Synchronous Motor Toggle
Toggles between induction and syn-
chronous motor types. Displays: SYNC
(synchronous) or IND (induction - de-
fault).
[HPmotor] — Motor Horsepower
Enters or calculates motor horsepower.
Displays: SYNC HP (synchronous) or
HP IND (induction - default).
Ampacity Tables
The ElectriCalc Pro uses NEC Table
310-16 (310-17 for Free Air) to find wire
sizes and ampacity ratings of wires.
The calculator uses the following data
to calculate wire size: 1) insulation
temperature rating (60°C, 75°C and
90°C); 2) wire material (copper or alu-
minum); and 3) ambient temperature.
Only standard AWG wire sizes are
used by the ElectriCalc Pro .
NOTE: 1/0, 2/0, 3/0 and 4/0 wires are
entered using the [0] key (i.e., 0, 00,
000 and 0000).
[WireSz] — Wire Size/Ampacity
Enters or calculates wire size based on
ampacity and voltage drop, if a voltage
drop length has been entered.
12 — ElectriCalc Pro