Safety Information; Safety Symbols; Maintenance - Pro'sKit MT-1132 User Manual

SAFETY INFORMATION

This multimeter has been designed according to IEC 1010
concerning electronic measuring instruments with an overvoltage
category (CAT III) and pollution 2. Follow all safety and operating
instructions to ensure that the meter is used safely and kept in
good operating condition. Full compliance with safety standards
can be guaranteed only with test leads supplied. If necessary,
they must be replaced with the type specified in this manual.

SAFETY SYMBOLS

Important safety information, refer to the operating manual.
Dangerous voltage may be present.
Earth ground
Double insulation (Protection class II).
Fuse must be replaced with rating specified in the manual.

MAINTENANCE

 Before opening the case, always disconnect test leads from all
energized circuits.
 For continue protection against fire; replace fuse only with the
specified voltage and current ratings: F10A/250V (Quick
Acting)
 Never use the meter unless the back cover is in place and
fastened completely
 Do not use abrasives or solvents on the meter. To clean it
using a damp cloth and mild detergent only.
1