Battery Test; Battery And Fuse Replacement - Pro'sKit MT-1132 User Manual

BATTERY TEST

1. Connect the red test lead to "VΩmA
lead to the "COM" jack
2. Set the function selector at desired "1.5V mA " position
3. Connect test leads across the source of load being measured
4. Read Voltage Value on the LCD display
WARNING
To avoid electric shock, be sure the thermocouple has been
removed before changing to another function measurement.
BATTERY & FUSE REPLACEMENT
 If "
" appears on display, it indicates that the battery should
be replaced.
 Fuse rarely needs to be replaced, if the fuse blew, mostly will
be the result of misuse by the operator
 To replace battery & fuse (10A/250V) remove the screws on
the bottom of the case, take out the battery case and simply
remove the old, and replace with a new one.
 Be careful to observe battery polarity.
WARNING
Before attempting to open the case, be always sure that test
leads have been disconnected from measurement circuits.
Close case and tighten screws completely before using the
meter to avoid electrical shock hazard.
ACCESSORIES
• User's manual
• Set of test leads
• Transistor test socket
" jack and black test
9