During Use; General Description - Pro'sKit MT-1132 User Manual

DURING USE

 Never exceed the protection limit values indicated in
specifications for each range of measurement.
 When the meter is linked to measurement circuit, do not touch
unused terminals.
 Never use the meter to measure voltages that might exceed
500V above earth ground in category III installations.
 When the value scale to be measured is unknown, set the
range selector at the highest position.
 Before rotating the function / range selector to change
functions, disconnect test leads from the circuit under test.
 When carrying out measurements on TV or switching power
circuits always remember that there may be high amplitude
voltages pulses at test points, which can damage the meter.
 Always careful when working with voltages above 60V DC or
30V AC rms. Keep fingers behind the probe barriers while
measuring.
 Before attempting to insert transistors for testing, always be
sure that test leads have been disconnected from any
measurement circuits.
 Components should not be connected to the hFE socket when
making voltage measurements with test leads.
 Never perform resistance measurements on live circuits.

GENERAL DESCRIPTION

The meter is a handheld 3 1/2 digital multimeter for measuring
DC and AC voltage, DC current, Resistance, Diode, Transistor
and Continuity Test with battery operated.
2