Battery Testing - Pro'sKit MT-1132 User Manual

RESISTANCE
Range
200Ω
2kΩ
20kΩ
200kΩ
2MΩ
Maximum Open Circuit Voltage: 2.8V
Overload Protection: 250V DC or rms. AC for all ranges.
TRANSISTOR hFE TEST (0-1000)
Range
NPN & PNP

BATTERY TESTING

Range
1.5V
OPERATING INSTRUCTIONS DC VOLTAGE
MEASUREMENT
1. Connect the red test lead to the "VΩmA
black test lead to the "COM" jack.
2. Rotate the function selector to the desired DCV position. If the
voltage to be measured is not known, set the selector to the
highest range position, and then reduce the range until proper
resolution is obtained.
3. Connect test leads across the source or load being measured.
4. Read voltage value on the LCD display along with the polarity
of the red test lead connection.
Resolution
0.1Ω
1Ω
10Ω
100Ω
1kΩ
Test Range
0-1000
Accuracy
±(2.5% of rdg + 2 digits)
Accuracy
±(0.8% of rdg + 5 digits)
±(0.8% of rdg + 5 digits)
±(0.8% of rdg + 5 digits)
±(0.8% of rdg + 5 digits)
±(1.0% of rdg + 5 digits)
Test Current
Ib=10mA
6
Test Voltage
Vce=2.8V
" jack and the