SOLTEK SL-75MIV User Manual page 60

75MIV
Swap Floppy Drive This field is effective only in systems with two floppy
Boot Up Floppy Seek Enabled : During POST, BIOS checks the track num-
Boot Up NumLock
Status
Gate A20 Option Gate A20 refers to the way the system addresses
Typematic Rate Setting When Disabled, the following two items (Typematic
Typematic Rate (Chars
Typematic Delay
(Msec)
Security Option If you have set a password, select whether the pass-
60
drives. Selecting Enabled assigns physical drive B
logical drive A, and physical drive A to logical drive B.
ber of the floppy disk drive to see whether
it is 40 or 80 tracks.
Disabled: During POST, BIOS will not check the track
number of the floppy disk drive.
Toggle between On or Off to control the state of the
NumLock key when the system boots. When toggled
On, the numeric keypad generates numbers instead
of controlling cursor operations.
memory above 1 MB (extended memory). When set
to Fast, the system chipset controls Gate A20. When
set to Normal, a pin in the keyboard controller con-
trols Gate A20. Setting Gate A20 to Fast improves
system speed, particularly with OS/2 and Windows.
Rate and Typematic Delay) are irrelevant. Keystroke
repeat at a rate determined by the keyboard control-
ler in your system.
When Enabled, you can select a typematic rate and
typematic delay.
Range between 6 and 30 characters per second. This
/ Sec) option controls the speed of repeating keystrokes.
Choose 250, 500, 750 and 1000. This option sets
the time interval for displaying the first and the sec-
ond characters.
word is required every time the System boots, or only
when you enter setup.