Connectors; 2-9.1 Con1 - SOLTEK SL-75MIV User Manual

2-9 CONNECTORS

• In this section we list all external connectors that user will use them.

2-9.1 CON1

16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
HDD LED CONNECTOR
PIN 16
PIN 17
PIN 18
PIN 19
DESCRIPTION
16 17 18 19 20 21 22 23 24
INFRARED CONNECTOR
PIN 21
PIN 22
PIN 23
PIN 24
PIN 25
DESCRIPTION
Logic High (+)
HDD LED SIGNAL
HDD LED SIGNAL
Logic High (+)
This connector supplies power to the cabinet's IDE
activity LED. Read and write activity by devices
connected to the Primary or SecondaryIDE
connector will cause the LED to light up.
25 26 27 28 29 30
INFRARED TRANSMIT SIGNAL
GND
INFRARED RECEIVE SIGNAL
NONE
Vcc
This connector supports an optional wireless
transmitting and receiving infrared module. This
module mounts to a small opening on system cases
that support this feature.
User must also configure the setting through
BIOS program "Peripheral Setup" to select whether
UART2 is directed for use with COM2 or IrDA.
Use the five pins and connect a ribbon cable from
the module to the motherboard's IR connector
according to the pin definitions.
75MIV
29