Inverting The Camera Output Picture - Sony MCC-3000MT Instructions For Use Manual

Note
"Shutter" in the Picture Profile menu cannot be
set when the AE function is on.
Speed (standard speed) mode
Set "Mode" to "Speed," and specify the time
([ 1/setting value ] sec.) with "Shutter Speed."
The available setting values vary depending on
the Country setting.
ECS (Extended Clear Scan) mode
Set "Mode" to "ECS," and specify the frequency
with "ECS Frequency."
The available setting values vary depending on
the Country setting.
Inverting the Camera
Output Picture
You can invert the camera output picture
vertically, horizontally, or both vertically and
horizontally, and shoot in that inverted state. Use
"Inversion" (see page 35) in the Picture Profile
menu to turn inversion on and off and to set the
inversion direction.
You can also switch the camera with the
CAMERA SEL button to configure settings for
each camera separately.
Normal: Do not invert.
H: Invert in the horizontal direction.
V: Invert in the vertical direction.
H+V: Invert in both the horizontal and vertical
directions.

Inverting the Camera Output Picture

31