Instructions For The User - EURO EG90GFSX Operating And Installation Instructions

Freestanding cooker and ceramic glass

Hide thumbs Also See for EG90GFSX:

User and installation manual (40 pages)

Table Of Contents

Table of Contents

HOW TO CLEAN THE INNER OVEN DOOR GLASS

One of the features of our cookers is that the inner

oven door glass can be easily removed for cleaning

without the aid of specialized personnel. Just open the

oven door and remove the support securing the glass

(fig. Q).

ATTENTION!!

This operation can be done also with the door

fitted on appliance, but in this way, pay attention

that when the glass is pull upwards, the force of

the hinges can close the door roughly.

OVEN DOOR REMOVAL

The oven door can be removed to give easier access to

the oven when cleaning. To remove, proceed as follows:

• Open the oven door and insert rivet or nail (R) in the

hole (F) of the hinge (fig. 12).

• Partially close the door, forcing it upwards at the

same time to free stop tooth and hinge sector.

• Once the hinge is free, pull the door forwards tilting

it slightly upwards to free sector.

•

To reassemble proceed in the reverse order,

paying attention to the correct position of sectors.

REPLACING THE OVEN LAMP (fig.13)

Ensure the appliance is switched off before

replacing the lamp to avoid the possibility of

electric shock..

In the event one or both oven lamps need replacing, the

new lamps must comply with the following requisites:

15 W - 230 V~ - 50 Hz - E 14 - and must be resistant

to high temperature (300°C).

To change the oven lamp follow the instructions :

• Draw out the side guide rails as described above.

Then, remove the glass protection cap (V) from

the bulb socket, lifting it with a screwdriver placed

between the cap and the oven wall and replace the

lamp (L). Fit the accessories back in reverse order.

OVEN SEAL

The oven seal guarantees the correct functioning

of the oven. We recommend you:

• clean it, avoiding abrasive tools or products.

• check its state now and then.

If the oven door seal has become hard or is

damaged, contact our Service Centre and avoid

using the oven until it has been repaired.