Download
Share
Print this page
  1. Manuals
  2. Brands
  3. EURO Manuals
  4. Cookers
  5. EG800FS2
  6. Manual to installation

EURO EG800FS2 Manual To Installation

Hide thumbs

Advertisement

Quick Links

A GUIDE TO USE,
INSTALLATION AND REGULATION
OF YOUR COOKERS
Models: EG800FS2
ESG800GUSX
AUS
MANUFACTURED BY: TECNO

Advertisement

loading
Need help?

Need help?

Do you have a question about the EG800FS2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for EURO EG800FS2

Summary of Contents for EURO EG800FS2

  • Page 1 A GUIDE TO USE, INSTALLATION AND REGULATION OF YOUR COOKERS Models: EG800FS2 ESG800GUSX MANUFACTURED BY: TECNO...
  • Page 2 The appliance was designed and made in accordance with the European standards listed below: => EN 30-1-1, EN 30-2-1 and EN 437 plus subsequent amendments (gas) => EN 60 335-1 and EN 60 335-2-6 (electrical) plus relative amendments The appliance complies with the prescriptions of the European Directives as below: =>...

  • Page 3: Table Of Contents

    ASSISTANCE AND SPARE PARTS the best functioning results. Any subsequent repairs or adjustments that may be necessary must be done with the maximum of care and attention by authorised personnel. For this reason we recommend you always contact us (refer below), specifying the brand, model, serial number and type of problem you are having with it.

  • Page 4: Important Notes And Precautions For Use

    IMPORTANT NOTES AND PRECAUTIONS FOR USE removed from the outer surfaces and You have purchased one of our the various inner parts, thoroughly products for which we thank you. We check that the appliance is in perfect are confident that this new appliance, condition.
  • Page 5 IMPORTANT NOTES AND PRECAUTIONS FOR USE • Before cooking for the first time, WARNING - Accessible parts may ensure the oven is empty and its door become hot during use. To avoid closed, heat the oven at maximum burns young children should be kept temperature for two hours.
  • Page 6 IMPORTANT NOTES AND PRECAUTIONS FOR USE • The appliance is not intended to be panel. operated by means of an external • Switch off the electrical supply before timer or separate remote-control you start cleaning or servicing the system appliance. •...

  • Page 7: Description Of The Appliance

    DESCRIPTION OF THE APPLIANCE PRESENTATION cooker is fi tted with a fully gas hotplate. Each knob on the front panel has a diagram printed above it showing to which burner it refers. The combination of the different sized burners offers the possibility of various types of cooking.

  • Page 8: Instructions For The User

    INSTRUCTIONS FOR THE USER DESCRIPTION OF THE CONTROLS HOB GAS BURNER KNOB (A) By rotating the knob in an anticlockwise direction, the following symbols appear: = Closed position = “Full on” position = “Reduced rate or Low” position GAS OVEN/ELECTRIC GRILL THERMOSTAT KNOB (B) By rotating the knob in an anticlockwise direction, the following functions appear: = Closed position...
  • Page 9 INSTRUCTIONS FOR THE USER HOB: GENERAL NOTES ON SAFETY ABNORMAL OPERATION Any of the following are considered to be abnormal • When using the burners, do not leave the appliance unsupervised. Ensure that children and the infirm do not play operation and may require servicing: with the appliance.
  • Page 10 INSTRUCTIONS FOR THE USER OVEN: GENERAL SAFETY INSTRUCTIONS • Do not leave the oven unsupervised during use. Ensure that children and the infirm do not play with HOT SURFACE the appliance. • Do not spray aerosols in the vicinity of this appliance •...
  • Page 11 INSTRUCTIONS FOR THE USER the bottom (fig. 1). HOW TO USE GAS OVEN • Be sure to remove the enamelled grill tray when the oven is in use. It is not intended to be used for baking The oven burner can be fitted with a safety or roasting purposes and it can interfere with heat thermocouple so, once the burner has been lit, distribution in the oven.
  • Page 12 INSTRUCTIONS FOR THE USER TIME AND TEMPERATURE CHART The above table gives guidelines for cooking a range of different foods, individual food, or personal preferences may slightly vary the oven position, temperature and cooking time from those suggested. Please note that: •...
  • Page 13 INSTRUCTIONS FOR THE USER AUTOMATIC ELECTRIC IGNITION OF THE GRILL • With gas grill the oven door must be left partially BURNER opened at its preset hold position and you must Automatic ignition is achieved by firstly, fully opening ensure that the protective heat guard (fig. 10) is the oven door and then pushing and turning the gas correctly fitted to protect the controls and facia control knob (B) clockwise to the grill setting, then...
  • Page 14 INSTRUCTIONS FOR THE USER USEFUL COOKING TIPS Meat: • If, when cooking meat, the time needed is more than 40 minutes, turn the oven off 10 minutes Cakes and bread: before the end of cooking time to exploit the • Heat the oven for at least 15 minutes before you residual heat (energy saving).
  • Page 15 INSTRUCTIONS FOR THE USER NEVER use sponges or abrasive products, and CLEANING AND MAINTENANCE aromatic or aliphatic solvents to remove stains or adhesives on the painted or stainless steel surfaces. • Prior to any maintenance work or cleaning, disconnect the appliance from the electricity OVEN CAVITY mains.

  • Page 16: Troubleshooting

    INSTRUCTIONS FOR THE USER OVEN DOOR REMOVAL The oven door can be removed to give easier access to the oven when cleaning. To remove, proceed as follows: • Open the oven door and insert rivet or nail (R) in the hole (F) of the hinge (fig.

  • Page 17: Instructions For The Installer

    INSTRUCTIONS FOR THE INSTALLER TECHNICAL INFORMATION UNPACKING YOUR COOKER • Once the packaging has been removed, thoroughly The installations, conversions and maintenance check that the appliance is in perfect condition. If operations listed in this part must only be carried you have any doubts do not use the appliance and out by authorised personnel.
  • Page 18 INSTRUCTIONS FOR THE INSTALLER OUTSIDE COOKER DIMENSIONS (A) MAINTENANCE SCHEDULE NO REGULAR MAINTENANCE IS REQUIRED EXCEPT FOR CLEANING LEVELLING THE COOKER • Adjustable feet, to be fitted to the appliance, which allow the height of the cooker to be aligned with other kitchen furniture This can be done by means of the terminal part of the leg themselves (fig.
  • Page 19 INSTRUCTIONS FOR THE INSTALLER SECURING THE COOKER TO WALL (fig. P) CHAINS AND SECURE THEM TO THE INSIDE OF THE CUPBOARD WITH TWO SCREWS ON EACH Note:- The installation of the chain provided SAFETY CHAIN. is for safety reasons, it must be installed as PLEASE TEST THAT THE COOKER DOES NOT indicated below.
  • Page 20 INSTRUCTIONS FOR THE INSTALLER INSTRUCTION FOR STABILIZING THE COOKER The installation of the brackets provided is for safety reasons and must be installed as indicated below. EQUIPMENT QUANTITY n°2 n°2 n°4 WARNING: In order to prevent the cooker tipping forwards in the event of children standing on the oven door or where users put extreme weight on the door when in open position, the stabilising means must be installed by the installer.
  • Page 21 INSTRUCTIONS FOR THE INSTALLER (fig.2) Mark it the same dis- tance, (X) on back wall. (fig.3) Drill two holes in the wall for each bracket according to the fig. 2 and fix the bracket. (fig.4) Push back the cooker against the wall. IMPORTANT: After fitting the stablising brackets and pushing the cooker into position, check that the cooker does not tilt forward or sideways Hose Restraint Chain...
  • Page 22 INSTRUCTIONS FOR THE INSTALLER GAS CONNECTION Installation using flexible connection As an option, the cooker may be installed with a This appliance shall be installed only by authorised flexible connection hose, which complies with AS/ personnel and in accordance with the manufacturer’s NZS 1869 (AGA Approved), 10 mm ID, class B or installation instructions, local gas fitting regulations, D, Minimum 1000 mm - Maximum 1200 mm, as an...
  • Page 23 INSTRUCTIONS FOR THE INSTALLER ELECTRICAL CONNECTION TAPS (fig. 19) All gas taps are male cone type with only one way of The electrical connection must be carried out in passage. The adjustment screw (V) is on the side of accordance with the current standards and laws the stem.

  • Page 24: Technical Features

    INSTRUCTIONS FOR THE INSTALLER Comply with the following instructions: Hot Plate Ignition Failure Injector replacement - Hob burners. • Check alignment of burner holes to electrode. To change the injectors on the hob, remove the burner • Check aeration sleeve for adjustment for gas type, cup and head and with a 7 mm Ø...
  • Page 25 INSTRUCTIONS FOR THE INSTALLER MAINTENANCE Prior to any maintenance work or changing parts, disconnect the appliance from the gas and electricity power sources. Servicing must only be carried out by authorised personnel. REPLACING THE TAPS AND THERMOSTAT Proceed in the following way when replacing a tap or thermostat : •...

  • Page 26: Technical Features

    7.5 mm open Grill Natural 1.00 11.0 7.5 mm open ELECTRICAL COMPONENTS NOMINAL DATA EG800FS2 - ESG800GUSX DESCRIPTION Oven lamp 15 W - E 14 - T 300 Fan of the rear heating element 25..29 W Cooling fas 12 W...
  • Page 27 TECHNICAL FEATURES sec. 0.5 White/Red sec. 0.5 White NO-Mv sec. 0.5 White sec.0.5 Black sec.0.5 White/Blue sec.0.5 Blue sec.1 Yellow/Green sec.0.5 Green sec.1 Yellow/Green ELECTRIC WIRING Cod. 4 6 4 2 5 1 9 2 3 DIAGRAM EG800FS2 Wiring diagram...
  • Page 28 TECHNICAL FEATURES ESG800GUSX Wiring diagram...
  • Page 32 SPACE FOR DATA LABEL 461308092_003 10/2013...

This manual is also suitable for:

Esg800gusxEsg60gusxEsd600eusx