Table of Contents
Advertisement
Low-Profile boards
For units with a particularly low overall height, there are so-called low-profile boards with a slot cover
with a lower overall height to match the low-profile units. To also install these low-profile boards in
normal board slots, you must mount a corresponding slot adapter beforehand To do this, you have to
first remove the slot cover from the casing rear panel.
►
Remove the slot cover from the casing rear panel (see "Installing a board") and undo the screw
that holds the slot cover together.
►
Make the required settings for the board.
Do not dispose of the slot cover. If you remove the board again, you must reinstall the slot
!
cover (cooling, fire protection or EMC regulations to be complied with).
Mounting slot adapter
1
2
A26361-K1009-Z120-1-7619, edition 4
►
Fit the slot adapter in the direction of the
arrow (1) on the slot cover of the low-profile
board and screw it on (2).
Now you can install the low-profile board in a
suitable slot like a normal board (see "Installing a
board").
System expansions
41
Advertisement
Table of Contents
