Table of Contents
Advertisement
6
Batch Transmission
Multiple documents can be stored in the memory and faxed together at a specified
time. In order to use this function, the corresponding Utility mode function must first
be used to program a one-touch dial key with the batch transmission settings
(transmission time) (p. 7-35).
To fax using batch transmission
1
Load the document into the Automatic Document Feeder.
2
If necessary, change the "Resolution" setting (p. 5-11).
3
Press the one-touch dial key
programmed with the desired
batch transmission settings.
4
Press the [Start] key to begin scanning the document.
The document is automatically sent at the specified time.
Tip
To cancel a batch transmission, select "CANCEL RESERV." from the
"FUNCTION" menu (p. 6-19).
6-6
6.1 Transmission Methods
Di1610fp
Advertisement
Table of Contents
