Specifying The Setting For "Scan Contrast; Specifying The Setting For "Resolution - Konica Minolta Di1610fp User Manual

7
Tip
If, at any time, you wish to quit setting a "TX OPERATION" function, press the
[No] key. When the message "STOP SETTING?" appears, press the [Yes] key
to quit.

Specifying the Setting for "SCAN CONTRAST"

1
Select the "TX OPERATION".
❍ Refer to "Selecting the "TX OPERATION" menu" on page 7-59.
2
Press the [1] key from the 10-Key
Pad to select "SCAN
CONTRAST".
3
Using the [ ] and [Ö ] keys, select
one of the five settings between
"LIGHT" and "DARK", and then
press the [Yes] key.
The "TX OPERATION" menu
appears again.

Specifying the Setting for "RESOLUTION"

1
Select the "TX OPERATION".
❍ Refer to "Selecting the "TX OPERATION" menu" on page 7-59.
2
Press the [2] key from the 10-Key
Pad to select "RESOLUTION".
7-60
7.8 Setting Up the Transmission
Di1610fp