Specifying The Setting For "Default Tx - Konica Minolta Di1610fp User Manual

7.8 Setting Up the Transmission
3
Using the [ ] and [Ö ] keys, select
the desired resolution setting, and
then press the [Yes] key.
❍ The resolution settings appear
as follows.
STD: Standard
FINE: Fine
S/F: Super Fine
H/T: Half Tone
If "H/T" was selected, a screen appears, allowing you to make a detailed setting.
(Continue with step 4.)
If any setting other than "H/T" was selected, the "TX OPERATION" menu
appears again.
4
Using the [ ] and [Ö ] keys, select
the desired halftone setting, and
then press the [Yes] key.
❍ The halftone settings appear
as follows.
STD: Standard
FINE: Fine
S/F: Super Fine
The "TX OPERATION" menu appears again.

Specifying the Setting for "DEFAULT TX"

1
Select the "TX OPERATION".
❍ Refer to "Selecting the "TX OPERATION" menu" on page 7-59.
2
Press the [3] key from the 10-Key
Pad to select "DEFAULT TX".
3
Using the [ ] and [Ö ] keys, select
either "MEM.TX" or "ADF TX", and
then press the [Yes] key.
The "TX OPERATION" menu
appears again.
Di1610fp
7
7-61