Specifying The Setting For "Line Monitor - Konica Minolta Di1610fp User Manual

7.10 Settings Up the Communication
3
Using the [ ] and [Ö ] keys, select
either "TONE" (for tone dialing) or
"PULSE" (for pulse dialing), and
then press the [Yes] key.
4
If "PULSE" was selected, select
either "10pps" or "20pps", and
then press the [Yes] key.
The "COMM.SETTING" menu
appears again.

Specifying the Setting for "LINE MONITOR"

1
Press the [Utility] key nine times.
"COMM. SETTING" appears.
2
From the 10-Key Pad, press the
[2] key.
A screen appears, allowing you to
select the monitoring volume.
3
Using the [ ] and [Ö ] keys, select
"HIGH", "LOW" or "OFF", and then
press the [Yes] key.
The "COMM.SETTING" menu
appears again.
Di1610fp
7
7-73