Table of Contents
Advertisement
6
6.1
Transmission Methods
Memory Transmission
With memory transmission, the document is scanned, then stored in the memory
for transmission (queued transmission).
Memory transmission is selected as the default transmission mode.
For details on sending faxes through memory transmission, refer to "Basic Faxing"
on page 5-12.
To specify Memory TX
1
Press the [Fax] key.
The machine enters Fax mode,
and the fax screen appears.
2
Load the document to be faxed
into the Automatic Document
Feeder.
❍
Adjust the Document Guide
Plates to fit the size of the
document.
❍
Load the document face up.
3
If necessary, change the "Resolution" setting (p. 5-11).
4
Press the [Memory TX] key, and
then check that the Memory TX
lamp lights up.
Note
If the Memory TX lamp is not
lit, the direct transmission is
selected.
6-2
6.1 Transmission Methods
Di1610fp
Advertisement
Table of Contents
