Table of Contents
Advertisement
1.6
Installing a Pentium II Processor
Follow these steps to install the Pentium II processor to the socket on the
CPU board.
1.
Place the retention mechanism over the processor socket on the CPU
board. Secure it with the screws that came with the package.
Figure 1-7
Installing the Pentium II Retention Mechanism
2.
With the processor module golden fingers pointing downward, align
the processor to the posts of the retention mechanism then lower it
down. See Figure 1-8.
The golden fingers of the Pentium II module is
slotted such that it only fits in one direction.
Make sure that module groove matches the one
on the processor socket.
System Board
1-13
Advertisement
Table of Contents
