3.2.11 Total Memory - Acer Power 2100 User Manual

3.2.11 Total Memory

This parameter specifies the total amount of onboard memory. The memory size is automatically detected by
BIOS during the POST (Power-On Self Test). If you install additional memory, the system automatically adjusts
this parameter to display the new memory size.
1st Bank
This parameter indicates the type of DRAM installed in the DIMM 1 socket. The None setting indicates that there
is no DRAM installed. For the location of the DIMM sockets, refer to Figure 2-1.
2nd Bank
This parameter indicates the type of DRAM installed in the DIMM 2 socket. The None setting indicates that there
is no DRAM installed. For the location of the DIMM sockets, refer to Figure 2-1.
AcerPower 2100 (V66LT/IDB3-C) User's Guide
58