Onboard Peripherals; Serial Port 1 - Acer Power 2100 User Manual

Serial Port 1 ....................... [Enabled ]
Base Address ..................... [3F8h]
IRQ .............................. [ 4 ]
Parallel Port ....................... [Enabled ]
Base Address ..................... [378h]
IRQ .............................. [ 7 ]
Operation Mode ................... [EPP]
ECP DMA Channel ................ [ - ]
•
Onboard Device Settings
3.5.1

Serial Port 1

This parameter allows you to enable or disable serial port 1.
Base Address
This function lets you set a logical base address for the serial port. The options are:
•
3F8h
•
2F8h
•
3E8h
•
2E8h
IRQ
This function lets you assign an interrupt for the serial port. The options are IRQ 4 and 3.
3.5.2 Parallel Port
This parameter allows you to enable or disable the parallel port.
AcerPower 2100 (V66LT/IDB3-C) User's Guide
66

Onboard Peripherals

The Base Address and IRQ parameters are
configurable only if the Serial Port parameter is
enabled.