Table of Contents
Advertisement
Chapter 1
1.1
Preinstallation
The preinstallation process involves the following activities:
•
Selecting a site
•
Unpacking components
1.1.1
Selecting a Site
Consider the following when selecting a site for your computer:
•
Determine the best site for your system. Cable paths should not run near equipment that might cause
electromagnetic or radio frequency interference such as radio transmitters, television sets, copy machines, or
heating and air conditioning equipment.
•
Route cables away from personnel and equipment traffic.
•
Avoid dusty areas and extremes of temperature and humidity.
1.1.2
Unpacking Components
Carefully unpack the contents of each box. Save all packing materials in case you need to move or ship the system
in the future.
Check that all items are present and in good condition. Contact your dealer immediately if anything is missing or
damaged.
Getting Started
Index
19
Advertisement
Chapters
Table of Contents
