Installing The Celeron Processor - Acer Power 2100 User Manual

4.7.3

Installing the Celeron Processor

Before you proceed, make sure that there is no processor installed in the CPU connector.
Follow these steps to install a Celeron processor:
1. Remove the Celeron processor from its protective packaging.
2. Lower the processor into the CPU socket and gently push it in until the golden fingers completely fit into the
connector.
Figure 4-19 Installing the Celeron Processor
AcerPower 2100 (V66LT/IDB3-C) User's Guide
110
Observe the ESD precautions when installing or
removing a system component. See section 4.1.1