Landesk Client Manager, Administrator Version - Acer Power 2100 User Manual

5.8.3 LANDesk Client Manager, Administrator
Version
A copy of the LANDesk Client Manager, Administrator Version, is bundled on your Acer Resource CD. It is
recommended that you install this software only if it is to be used by a system administrator as the management
station.
Installing LANDesk Client Manager, Administrator Version
To install LDCM, Administrator Version, on your AcerPower Windows desktop:
•
Insert the Acer Resource CD into your CD-ROM drive.
•
Click Start | Run.
•
Type x:/Softlib/Ldcm.adm/Setup
(where x is the CD-ROM drive).
•
Click OK.
•
Follow the instructions to complete the installation of LDCM, Administrator version.
AcerPower 2100 (V66LT/IDB3-C) User's Guide
128
You must have LANDesk Client Manager,
Client Version, installed on your system
before installing the Administrator Version.
Load TCP/IP, IPX/SPX, and File Sharing
before installing the Administrator Version.