Power Switch < 4 Sec; Schedule Resume From Suspend; System Wake-Up Event; System Sleep Timer - Acer Power 2100 User Manual

System Sleep Timer

This parameter automatically puts the system to power-saving mode after a specified period of inactivity. Any
keyboard or mouse action, or any activity detected from the IRQ channels resumes system operation.

Sleep Mode

This parameter lets you specify the power-saving mode that the system will enter after a specified period of
inactivity. The options are Standby or Suspend mode.
This parameter becomes configurable only if the System Sleep Timer is enabled. Any keyboard or mouse action, or
any enabled monitored activity occurring through the IRQ channels resumes system operation.
3.6.2 Power Switch < 4 sec.
When set to Power Off, the system automatically turns off when the power switch is pressed. When set to
Suspend, the system enters the suspend mode.
3.6.3

Schedule Resume from Suspend

This parameter allows you to set a certain time to wake-up your system from suspend mode. The default setting is
Disabled.
Resume Time
If Schedule Resume from Suspend is enabled, the system will resume operation on the time indicated here.
3.6.4

System Wake-Up Event

This parameter lets you specify the activity that will resume the system to normal operation.
Modem Ring Indicator
When Enabled, any fax/modem activity wakes the system from Sleep mode.
AcerPower 2100 (V66LT/IDB3-C) User's Guide
72